Sunforgettable Total Protection Brush-on Shield SPF 50 Glow

Apply generously and evenly in circular motions prior to sun and environmental exposure. Wear alone all over for a subtle to buildable glow and full protection. 

Or use as a highlighter by applying to high points of the face. In this case, ensure full SPF protection by using another Total Protection™ product applied all over first. 

1. OPEN: Remove brush cap, pull back the sleeve, and remove and discard the rubber band. Put cap back on.

2. ACTIVATE: With the cap still on, hold the brush with cap facing down and tap 3-5 times on a hard surface. Put some power behind those taps! Then remove the cap and run your finger through the bristles to ensure powder is flowing. Repeat tapping if needed, until you see a small puff of powder in the air when running your finger through the bristles.  

3. APPLY: Using small circular motions, sweep directly onto dry bare skin, moisturized skin, or over makeup. Apply generously across your face for at least 60 seconds while making multiple passes. Don't forget about your ears, neck and other areas! Reload more powder into bristles by giving the brush a good shake with bristles facing downwards, or recap, tap, and flick as necessary during application. If applying directly over a moisturizer, primer or liquid foundation, ensure products have fully set before applying Sunforgettable®. Reapply at least every two hours for continued protection.

Vegan: Yes
Paraben-free: Yes
Fragrance-free: Yes

Active Ingredients:
Titanium Dioxide 22.5%; Zinc Oxide 22.5%

Inactive Ingredients:
Mica, Dimethicone/Vinyl Dimethicone Crosspolymer, Dimethiconol/Propylsilsequioxane/Silicate Crosspolymer, Lycopodium Clavatum Extract, Sodium Hyaluronate, Imperata Cyclindrica Root Extract, Glycerin, Water, Caesalpinia Spinosa Fruit Pod Extract, Vitis Vinifera (Grape) Seed Extract, Camellia Sinensis Leaf Extract, Quercus Robur (Oak) Wood Extract, Helianthus Annuus (Sunflower) Sprout Extract, Maltodextrin, Methicone, Triethoxycaprylylsilane, Laureth-4, Sodium Benzoate, Potassium Sorbate, Chromium Oxide Greens (CI 77288), Iron Oxides (CI77491, CI 77492, CI 77499).

• Users reported skin looked more radiant and luminous after application

• Customers frequently noted seamless reapplication over makeup throughout the day

• Consumers highlighted the lightweight feel and non-cakey finish

What is the difference between the Glow and the Bronze? The Brush-On Shield Glow will provide you with a soft, pearlescent glow and luminosity that will allow you to achieve a lit-from-within look. The Brush-On Shield Bronze will give you a natural sun-kissed bronze and all-over warmth to give your look a bronzed radiance on-the-go.

Should I apply these before or after my makeup routine? These products can be applied after your makeup routine, or in place of the makeup products used to highlight or contour, as they are designed to enhance skin for a complete look with unmatched sun and environmental protection. If you choose to use them to highlight and/or contour, be sure to layer with another Total Protection™ product applied full-face to achieve a customized and fully protected look.

How do the Total Protection™ Brush-on Shield Glow and Bronze compare to the Total Protection™ Face Shield Glow and Bronze? Face Shields Glow and Bronze SPF 50 are liquid formulations. These offer more intense radiance without the shimmer , and leave skin with a dewy finish. The Brush-on Shields SPF 50 in Glow and Bronze are powder formulations which offer a convenient, on-the go application of both SPF and the radiance. While you may notice shimmer particles in the Brush-on Shields, these provide a more subtle, buildable luminosity than their Face Shield counterparts and leave a silky finish.

What is the reasoning for why the colors appear visibly lighter in the brush component? This is a result of our new technology in which our zinc oxide and titanium dioxide are encapsulated, and how they interact with the iron oxides and our skin. While slightly lighter looking in the brush component, when applied to skin the colors wear the same.

How do I activate/prime my brush? In order to ensure the product is dispensing properly, be sure to activate the brush prior to application. Remove the cap and push the plastic sleeve down. Remove and discard the rubberband and pull the sleeve back up. Put the cap back on. Tap firmly several times on a hard surface with the cap side down. Open and pull down the sleeve again and flick the bristles to ensure powder is flowing, and apply using light pressure in small circular motions. Repeat as needed until powder flows consistently.

Will these work with all skin tones? Yes. The Total Protection™ Brush-On Shield SPF 50 Glow and Bronze are are versatile shades that can be worn by a range of skin tones, whether worn full-face for complete protection and glow or bronze radiance, or used as highlight or contour to add dimension and depth.

How much do I need to apply to achieve SPF 50 protection? Even application around the face for at least 60 seconds is recommended to achieve full SPF 50 coverage. Reapply at least every two hours for continued protection.

Is the brush tube BPA free? Yes, the tube is BPA free. It is composed of Styrene Acrylonitrile (SAN) and Acrylonitrile Butadiene Styrene (ABS).

Is Total Protection™ Brush-On Shield Glow SPF 50 water- or sweat resistant? Yes, Total Protection™ Brush-On Shield Glow SPF 50 is water/sweat- resistant for up to 80 minutes.

Can pregnant or nursing women use Sunforgettable® Total Protection™ products? Total Protection™ products have not been tested on pregnant or nursing women. Consult your physician before using.